Create Geopoints Group Manually

Creating a Group of Geopoints Manually

CAD drafting Create Geopoints Group Manually 0 Ribbon: Topoplan – Geopoints > CAD software Create Geopoints Group Manually 1 Create Groups of Geopoints Manually

CAD drawing Create Geopoints Group Manually 2 Menu: Topoplan – Geopoints > CAD drafting Create Geopoints Group Manually 3 Create Groups of Geopoints Manually

CAD software Create Geopoints Group Manually 4 Toolbar: Geopoints > CAD drawing Create Geopoints Group Manually 5 Create Groups of Geopoints Manually

CAD drafting Create Geopoints Group Manually 6 Command line: C3D_CREATE_COGO_POINT_GROUP

Manual creation of a group of geopoints with a name, description, styles, and a prefix of the raw description of the geopoint, which is a criterion for adding points to the group.

CAD software Create Geopoints Group Manually 7

The command options are set in the Properties bar:

· Name;

· Description;

· Marker Style (of those existing in the drawing);

· Override Marker Style;

· Label Style (of those existing in the drawing);

· Override Label Style;

· Add with Raw Description prefix - the criterion for adding a point to the group. Allows you to add to the group only points with the specified raw description.

Command prompts:

Change parameters in ‘Properties’ window and choose ‘OK’ to create Point Group or ‘Cancel’ to discard any changes <ОK> or [OK/Cancel]:

Yes – a group of geopoints will be created with the current settings.

Cancel – if the settings have been changed, they will not be preserved. A group of geopoints will be created with the settings displayed right after the command starts.