Help Center

Setting of the Orthographic and Isometric Views

To quickly set the view, select the View Views and select the required standard orthographic and isometric views.

CAD drafting Setting of the Orthographic and Isometric Views 0

Orthographic Views

Set Top

CAD software Setting of the Orthographic and Isometric Views 1    Menu: View – Views > CAD drawing Setting of the Orthographic and Isometric Views 2 Set Top

CAD drafting Setting of the Orthographic and Isometric Views 3 Command line: VIEW1

Set the top view.

CAD software Setting of the Orthographic and Isometric Views 4

Set Bottom

CAD drawing Setting of the Orthographic and Isometric Views 5    Menu: View – Views > CAD drafting Setting of the Orthographic and Isometric Views 6 Set Bottom

CAD software Setting of the Orthographic and Isometric Views 7 Command line: VIEW2

Set the bottom view.

CAD drawing Setting of the Orthographic and Isometric Views 8

Set Left

CAD drafting Setting of the Orthographic and Isometric Views 9    Menu: View – Views > CAD software Setting of the Orthographic and Isometric Views 10 Set Left

CAD drawing Setting of the Orthographic and Isometric Views 11 Command line: VIEW4

Set the left view.

CAD drafting Setting of the Orthographic and Isometric Views 12

Set Right

CAD software Setting of the Orthographic and Isometric Views 13    Menu: View – Views > CAD drawing Setting of the Orthographic and Isometric Views 14 Set Right

CAD drafting Setting of the Orthographic and Isometric Views 15 Command line: VIEW5

Set the right view.

CAD software Setting of the Orthographic and Isometric Views 16

Set Front

CAD drawing Setting of the Orthographic and Isometric Views 17    Menu: View – Views > CAD drafting Setting of the Orthographic and Isometric Views 18 Set Front

CAD software Setting of the Orthographic and Isometric Views 19 Command line: VIEW3

Set the front view.

CAD drawing Setting of the Orthographic and Isometric Views 20

Set Back

CAD drafting Setting of the Orthographic and Isometric Views 21   Menu: View – Views > CAD software Setting of the Orthographic and Isometric Views 22 Set Back

CAD drawing Setting of the Orthographic and Isometric Views 23 Command line: VIEW6

Set the back view.

CAD drafting Setting of the Orthographic and Isometric Views 24

Isometric Views

SW Isometric

CAD software Setting of the Orthographic and Isometric Views 25    Menu: View – Views > CAD drawing Setting of the Orthographic and Isometric Views 26 SW Isometric

CAD drafting Setting of the Orthographic and Isometric Views 27 Command line: SWISO

Set the southwest isometric view.

CAD software Setting of the Orthographic and Isometric Views 28

SE Isometric

CAD drawing Setting of the Orthographic and Isometric Views 29    Menu: View – Views > CAD drafting Setting of the Orthographic and Isometric Views 30 SE Isometric

CAD software Setting of the Orthographic and Isometric Views 31 Command line: SEISO

Set the southeast isometric view.

CAD drawing Setting of the Orthographic and Isometric Views 32

NE Isometric

CAD drafting Setting of the Orthographic and Isometric Views 33    Menu: View – Views > CAD software Setting of the Orthographic and Isometric Views 34 NE Isometric

CAD drawing Setting of the Orthographic and Isometric Views 35 Command line: NEISO

Set the northeast isometric view.

CAD drafting Setting of the Orthographic and Isometric Views 36

NW Isometric

CAD software Setting of the Orthographic and Isometric Views 37    Menu: View – Views > CAD drawing Setting of the Orthographic and Isometric Views 38 NW Isometric

CAD drafting Setting of the Orthographic and Isometric Views 39 Command line: NWISO

Set the northwest isometric view.

CAD software Setting of the Orthographic and Isometric Views 40

 

We collect Cookies
We use cookies to ensure that we give you the best experience on our website. By clicking “Accept”, you agree to our website’s cookie use as described in our Privacy Statement.