De 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wedge
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Wedge
Ribbon: Modeling modes – Meshes – Mesh > 
Wedge
Menu: Draw – Meshes > 
Wedge
Command line: 3D – Wedge
The command creates a right-angled wedge-shaped polygon.
Command options:
|
Reference |
Specifies the rotation angle of the wedge, counted from the reference angle. |
|
Points |
Specifies the rotation angle, counted from the reference angle to the conditional segment, specified by two points. |
Command prompts:
|
Specify corner point of wedge: |
Specify point 1. |
|
Specify length of wedge: |
Specify point 2. |
|
Specify width of wedge: |
Specify point 3. |
|
Specify height of wedge: |
Specify point 4. |
|
Specify rotation angle of wedge about the Z axis or [Reference]: |
Specify a point or enter an angle value. The rotation angle is set relative to the first corner specified (point 1) and is measured from the X-axis on the XY plane. |
Command prompts when selecting the Reference option:
|
Specify the reference angle <0>: |
Specify the point or enter the angle value. |
|
Specify the new angle or [Points]: |
Specify the point or enter the angle value, or select the Points option, |
note: It is convenient to use the Reference and Points options to specify the wedge orientation relative to another existing object.