Managing the Display of Annottaive Objects

Managing the Display of Annotative Objects

Annotative objects are usually scaled differently than drawing views. Annotative objects are defined not by the model size, but by the sheet height. They are assigned with one or more scales. A scale depends on how such objects should look when printed.

If you have annotative objects in the drawing, you can control their display.

Display of annotative objects according to the current scale

CAD drafting Managing the Display of Annottaive Objects 0 Ribbon: Annotate – Annotation Scaling > CAD software Managing the Display of Annottaive Objects 1 Current Scale

CAD drawing Managing the Display of Annottaive Objects 2 Menu: View – Show Annotative Objects > CAD drafting Managing the Display of Annottaive Objects 3 Current Scale

Display of all annotative objects

CAD software Managing the Display of Annottaive Objects 4 Ribbon: Annotate – Annotation Scaling> CAD drawing Managing the Display of Annottaive Objects 5 All Scales

CAD drafting Managing the Display of Annottaive Objects 6 Menu: View – Show Annotative Objects > CAD software Managing the Display of Annottaive Objects 7 All Scales

NOTE If a drawing has a large number of scales, this may slow down the processing of that drawing and other drawings that reference the drawing. To remove unused scales, it is recommended to delete scales by running the -PURGE command and selecting the Annotative scales option. This check is also carried out when opening a document.