Control the Display of Hatched Objects

        Status bar:  HATCH

        Ribbon: Annotate – Hatch >  Show Hatches

        Command line: VIEWSHOWHATCHES)

The command to turn on and off the display of hatched objects, such as wide polylines, rings, shapes, fills, and hatches.

When the mode is turned off, objects are displayed as outlines on the screen, which increases the speed of processing large files and is also used when printing draft drawings.

Switching the fill mode does not affect objects drawn with line weight.

The mode is disabled

The mode is enabled

After switching the mode, the Regeneration (REGEN) command is automatically launched.

Display performance can also be improved by simplifying the text display.

Switching the fill mode does not affect objects drawn using lineweight.

You can also control the display of filled objects using the FILLMODE system variable:

·          FILLMODE = 0 – fill/hatch disabled, only the object outlines are displayed;

·          FILLMODE = 1 – fill/hatch enabled (default value).