basket personal
nanoCAD Platform Help

Creating a Surface Based on a 3D Slope

CAD drafting Creating a Surface Based on a 3D Slope 0 Ribbon: Topoplan – Create TIN > CAD software Creating a Surface Based on a 3D Slope 1 Creating a Surface Based on a 3D Slope

CAD drawing Creating a Surface Based on a 3D Slope 2 Menu: Topoplan – Create TIN > CAD drafting Creating a Surface Based on a 3D Slope 3 Creating a Surface Based on a 3D Slope

CAD software Creating a Surface Based on a 3D Slope 4 Toolbar: Create TIN > CAD drawing Creating a Surface Based on a 3D Slope 5 Creating a Surface Based on a 3D Slope

CAD drafting Creating a Surface Based on a 3D Slope 6 Command line: NG_GET_MESH_FROM_3D_SLOPE

The command creates based on a 3d-slope object: SubMesh or PolyFaceMesh.

The command options are set on the Properties bar.

Command prompts:

Select slopes or [?]:

Selects the slope

Apply changes? <Yes> or [Yes/No/Save/saveDefault]:

Yes – the command will be performed taking into account changes in settings made by the user in the current command session.

No – the command will be performed with the settings that displayed right after the command started.

Save – saving settings to the document.

saveDefault – saving settings to the register.

 

↑