basket personal
nanoCAD Platform Help

Constructing a Rhombus by Two Points from the Center

CAD drafting Constructing a Rhombus by Two Points from the Center 0

CAD software Constructing a Rhombus by Two Points from the Center 1 Ribbon: Home, Draw – Draw – Quadrangle > CAD drawing Constructing a Rhombus by Two Points from the Center 2 Rhombus by Two Points from the Center

CAD drafting Constructing a Rhombus by Two Points from the Center 3 Menu: Draw – Quadrangle > CAD software Constructing a Rhombus by Two Points from the Center 4 Rhombus by Two Points from the Center

CAD drawing Constructing a Rhombus by Two Points from the Center 5 Toolbar: Draw – CAD drafting Constructing a Rhombus by Two Points from the Center 6 > CAD software Constructing a Rhombus by Two Points from the Center 7

CAD drawing Constructing a Rhombus by Two Points from the Center 8 Command line: CQUAD_RHO_CENT2P, QRHOMBCENTER2P

The command to construct a rhombus using two points from the center.

CAD drafting Constructing a Rhombus by Two Points from the Center 9

Command prompts:

Specify point or [FT-FigType/CM-ConstructMethod/W-Width/H-Height/AX-AngleToX/SD-SaveDims/CD-ClearData]:

Specify the center of the rhombus (point 1).

Specify next point or [FT-FigType/CM-ConstructMethod/W-Width/H-Height/AX-AngleToX/SD-SaveDims/CD-ClearData]:

Specify the second point of the rhombus (point 2).

Specify next point or [FT-FigType/CM-ConstructMethod/W-Width/H-Height/AX-AngleToX/SD-SaveDims/CD-ClearData]:

Specify the third point of the rhombus (point 3).

 

Select option Width/Height.

Specify dimension on space:

Specify points to define the rectangle's width or height, or enter a width/height value.

Second point:

Specify the second point to define the rectangle’s width or height.

 

Select option AngleToX.

Specify dimension on space:

Specify the first point to define the rotation angle or enter the angle value in degrees.

Second point:

Specify the second point to define the rotation angle.

↑