basket personal
nanoCAD Platform Help

Constructing a Rhombus by Side and Point

CAD drafting Constructing a Rhombus by Side and Point 0

CAD software Constructing a Rhombus by Side and Point 1 Ribbon: Home, Draw – Draw – Quadrangle > CAD drawing Constructing a Rhombus by Side and Point 2 Rhombus by Side and Point

CAD drafting Constructing a Rhombus by Side and Point 3 Menu: Draw – Quadrangle > CAD software Constructing a Rhombus by Side and Point 4 Rhombus by Side and Point

CAD drawing Constructing a Rhombus by Side and Point 5 Toolbar: Draw – CAD drafting Constructing a Rhombus by Side and Point 6 > CAD software Constructing a Rhombus by Side and Point 7

CAD drawing Constructing a Rhombus by Side and Point 8 Command line: CQUAD_RHO_SIDEANG, QRHOMBSIDEPNT

The command to construct a rhombus by side and point.

CAD drafting Constructing a Rhombus by Side and Point 9

Command prompts:

Specify point or [FT-FigType/CM-ConstructMethod/LS-LengthSide/AX-AngleTox/A-Angle/SD-SaveDims/CD-ClearData]:

Specify the center of the rhombus (point 1).

Specify next point or [FT-FigType/CM-ConstructMethod/LS-LengthSide/AX-AngleTox/A-Angle/SD-SaveDims/CD-ClearData]:

Specify the second point of the rhombus (point 2).

Specify next point or [FT-FigType/CM-ConstructMethod/LS-LengthSide/AX-AngleTox/A-Angle/SD-SaveDims/CD-ClearData]:

Specify the third point of the rhombus (point 3).

 

Select option LengthSide.

Specify dimension on space:

Specify points to define the length of the rhombus side or enter a length value.

Second point:

Specify the second point to define the length of the rhombus side

 

Select option AngleToX.

Specify dimension on space:

Specify the first point to define the rotation angle or enter the angle value in degrees.

Second point:

Specify the second point to define the rotation angle.

 

Select option Angle.

Specify dimension on space:

Specify the first point to define the angle or enter the angle value in degrees.

Second point:

Specify the second point to define the angle.

↑