basket personal
nanoCAD Platform Help

Constructing a Rhombus by Diagonal and a Point

CAD drafting Constructing a Rhombus by Diagonal and a Point 0

CAD software Constructing a Rhombus by Diagonal and a Point 1 Ribbon: Home, Draw – Draw – Quadrangle > CAD drawing Constructing a Rhombus by Diagonal and a Point 2 Rhombus by Diagonal and a Point

CAD drafting Constructing a Rhombus by Diagonal and a Point 3 Menu: Draw – Quadrangle > CAD software Constructing a Rhombus by Diagonal and a Point 4 Rhombus by Diagonal and a Point

CAD drawing Constructing a Rhombus by Diagonal and a Point 5 Toolbar: Draw – CAD drafting Constructing a Rhombus by Diagonal and a Point 6 > CAD software Constructing a Rhombus by Diagonal and a Point 7

CAD drawing Constructing a Rhombus by Diagonal and a Point 8 Command line: CQUAD_RHO_3POINTS, QRHOMBDIAGPNT

The command to construct a rhombus using a diagonal and a point.

CAD drafting Constructing a Rhombus by Diagonal and a Point 9

Command prompts:

Specify point or [FT-FigType/CM-ConstructMethod/W-Width/H-Height/AX-AngleToX/SD-SaveDims/CD-ClearData]:

Specify the first point of the rhombus (point 1).

Specify next point or [FT-FigType/CM-ConstructMethod/W-Width/H-Height/AX-AngleToX/SD-SaveDims/CD-ClearData]:

Specify the second point of the rhombus diagonally (point 2).

Specify next point or [FT-FigType/CM-ConstructMethod/W-Width/H-Height/AX-AngleToX/SD-SaveDims/CD-ClearData]:

Specify the third point of the rhombus (point 3).

 

Select option Width/Height.

Specify dimension on space:

Specify points to define the rectangle's width or height, or enter a width/height value.

Second point:

Specify the second point to define the rectangle’s width or height.

 

Select option AngleToX.

Specify dimension on space:

Specify the first point to define the rotation angle or enter the angle value in degrees.

Second point:

Specify the second point to define the rotation angle.

↑