basket personal
nanoCAD Platform Help

Constructing a Rectangle by Three Points

CAD drafting Constructing a Rectangle by Three Points 0

CAD software Constructing a Rectangle by Three Points 1 Ribbon: Home, Draw – Draw – Quadrangle > CAD drawing Constructing a Rectangle by Three Points 2 Rectangle by Three Points

CAD drafting Constructing a Rectangle by Three Points 3 Menu: Draw – Quadrangle > CAD software Constructing a Rectangle by Three Points 4 Rectangle by Three Points

CAD drawing Constructing a Rectangle by Three Points 5 Toolbar: Draw – CAD drafting Constructing a Rectangle by Three Points 6 > CAD software Constructing a Rectangle by Three Points 7

CAD drawing Constructing a Rectangle by Three Points 8 Command line: CQUAD_REC_3POINTS, QRECT3P, QRECTANGLE3P

The command to construct a rectangle using three vertices.

CAD drafting Constructing a Rectangle by Three Points 9

Command prompts:

Specify point or [FT-FigType/ CM-ConstructMethod/CD-ClearData/SD-SaveDims/W-Width/H-Height/AX-AngleToX]:

Specify the vertex of the rectangle (point 1).

Specify next point or [FT-FigType/ CM-ConstructMethod/CD-ClearData/SD-SaveDims/W-Width/H-Height/AX-AngleToX]:

Specify the length of the first side (point 2).

Specify next point or [FT-FigType/ CM-ConstructMethod/CD-ClearData/SD-SaveDims/W-Width/H-Height/AX-AngleToX]:

Specify the length of the second side (point 3).

 

Select option Width/Height.

Specify dimension on space:

Specify points to define the rectangle's width or height, or enter a width/height value.

Second point:

Specify the second point to define the rectangle’s width or height.

 

Select option AngleToX.

Specify dimension on space <0>:

Specify the first point to define the rotation angle or enter the angle value in degrees.

Second point:

Specify the second point to define the rotation angle.

↑