basket personal
nanoCAD Platform Help

Constructing a Parallelogram by Two Points

CAD drafting Constructing a Parallelogram by Two Points 0

CAD software Constructing a Parallelogram by Two Points 1 Ribbon: Home, Draw – Draw – Quadrangle > CAD drawing Constructing a Parallelogram by Two Points 2 Parallelogram by Two Points

CAD drafting Constructing a Parallelogram by Two Points 3 Menu: Draw – Quadrangle > CAD software Constructing a Parallelogram by Two Points 4 Parallelogram by Two Points

CAD drawing Constructing a Parallelogram by Two Points 5 Toolbar: Draw – CAD drafting Constructing a Parallelogram by Two Points 6 > CAD software Constructing a Parallelogram by Two Points 7

CAD drawing Constructing a Parallelogram by Two Points 8 Command line: CQUAD_PAR_2POINTS, QPAR2P, QPARALLELOGRAM2P

The command to construct a parallelogram using two points.

CAD drafting Constructing a Parallelogram by Two Points 9

Command prompts:

Specify point or [FT-FigType/ CM-ConstructMethod/CD-ClearData/SD-SaveDims/W-Width/H-Height/A-Angle]:

Specify the first point of the parallelogram (point 1).

Specify next point or [FT-FigType/ CM-ConstructMethod/CD-ClearData/SD-SaveDims/W-Width/H-Height/A-Angle]:

Specify the second point along the diagonal (point 2).

 

Select option Width/Height.

Specify dimension on space:

Specify points to define the rectangle's width or height, or enter a width/height value.

Second point:

Specify the second point to define the rectangle’s width or height.

 

Select option Angle.

Specify dimension on space:

Specify the first point to define the angle or enter the angle value in degrees.

Second point:

Specify the second point to define the angle.

↑