basket personal
nanoCAD Platform Help

Constructing a Parallelogram by Three Points

CAD drafting Constructing a Parallelogram by Three Points 0

CAD software Constructing a Parallelogram by Three Points 1 Ribbon: Home, Draw – Draw – Quadrangle > CAD drawing Constructing a Parallelogram by Three Points 2 Parallelogram by Three Points

CAD drafting Constructing a Parallelogram by Three Points 3 Menu: Draw – Quadrangle > CAD software Constructing a Parallelogram by Three Points 4 Parallelogram by Three Points

CAD drawing Constructing a Parallelogram by Three Points 5 Toolbar: Draw – CAD drafting Constructing a Parallelogram by Three Points 6 > CAD software Constructing a Parallelogram by Three Points 7

CAD drawing Constructing a Parallelogram by Three Points 8 Command line: CQUAD_PAR_3POINTS, QPAR3P, QPARALLELOGRAM3P

The command to construct a parallelogram using three points.

CAD drafting Constructing a Parallelogram by Three Points 9

Command prompts:

Specify point or [FT-FigType/ CM-ConstructMethod/CD-ClearData/SD-SaveDims/W-Width/H-Height/A-Angle/AX-AngleToX]:

Specify the first point of the parallelogram (point 1).

Specify next point or [FT-FigType/ CM-ConstructMethod/CD-ClearData/SD-SaveDims/W-Width/H-Height/A-Angle/AX-AngleToX]:

Specify the second point of the parallelogram on the side (point 2).

Specify next point or [FT-FigType/ CM-ConstructMethod/CD-ClearData/SD-SaveDims/W-Width/H-Height/A-Angle/AX-AngleToX]:

Specify the third point of the parallelogram (point 3).

 

Select option Width/Height.

Specify dimension on space:

Specify points to define the rectangle's width or height, or enter a width/height value.

Second point:

Specify the second point to define the rectangle’s width or height.

 

Select option Angle.

Specify dimension on space:

Specify the first point to define the angle or enter the angle value in degrees.

Second point:

Specify the second point to define the angle.

 

Select option AngleToX.

Specify dimension on space:

Specify the first point to define the rotation angle or enter the angle value in degrees.

Second point:

Specify the second point to define the rotation angle.

↑