Section of point clouds by UCS

CAD drafting Section of point clouds by UCS 0 Ribbon: Point Clouds – Clip and Section – Section > CAD software Section of point clouds by UCS 1 Section by UCS

CAD drawing Section of point clouds by UCS 2 Menu: Point Clouds + 3DScan – Section > CAD drafting Section of point clouds by UCS 3 By UCS

CAD software Section of point clouds by UCS 4 Toolbar: Clip and Section 3DScan > CAD drawing Section of point clouds by UCS 5 By UCS

CAD drafting Section of point clouds by UCS 6 Command line: PC_SECT_UCS

The command creates section parallel to one of coordinate plane (select plane through options in the command line).

Create section by UCS:

1. Run the Section by UCS command.

2. Specify view port to create section from (if there are several view ports).

3. Specify viewport to create section there (if there are several view ports).

4. Choose an option in the command line to specify the coordinate plane parallel to the section plane (XY is default):

Choose coordinate plane parallel to the section plane [XY/XZ/YZ] <XY>

5. Set the distance from the origin along a coordinate axis in the drawing units. 0 is the default value.

6. Set the depth of section in the drawing units. 1 is the default value.

7. Set an angle between the section plane and the selected coordinate plane (XY, XZ, YZ). 0 is the default value (i.e. the section plane is parallel to the coordinate plane).