nanoCAD 3D Solid Modeling Module Test Drive

The 3D Array

Create ⌀15 holes with the 3D Polar Array operation.

1. Sketch a hole at the end of the largest step. Use snaps to position the hole accurately in relation to the center (Fig. 27).

Fig. 27. The sketch of the ⌀15 mm holes

2. Apply the 3D Extrude operation with the Cut and Through options enabled.

3. Activate the command 3D Polar Array (Fig. 28).

Fig. 28. 3D Polar Array command

3.1. Click on the hole and select the rotation axis with a click on the 3D model space.

3.2. Add the following parameters in the dialog box: the number of items – 6, the angle 360° (Fig. 29).

Fig. 29. The 3D Polar Array — Parameters

4. For a more realistic view of the model, enable the Perspective view in the View tab (Fig. 30).

Fig. 30. Perspective view

5. You can change the color of the model. Select the Part in the 3D History and choose the desired color in the Properties.

6. You can turn off the UCS sign in the Properties if needed.

7. Save the changes. The final view of the model is shown in Fig. 31.

Fig. 31. The final view of the model

Go next:
We collect Cookies
We use cookies to ensure that we give you the best experience on our website. By clicking “Accept”, you agree to our website’s cookie use as described in our Privacy Statement.